1. Bayanin Kamfani

Womic Steel wata masana'anta ce da aka san ta a duniya wajen kera bututun ƙarfe da bututun ƙarfe, wacce ta ƙware a fannin kayan aiki masu inganci don amfani mai mahimmanci. Tare da gogewa da gogewa na shekaru da yawa da kuma cibiyar samar da kayayyaki ta zamani, mun sanya kanmu a matsayin abokin tarayya mai aminci ga masana'antu waɗanda ke buƙatar daidaito, dorewa, da cikakken tabbacin inganci. An ƙera bututun SA213-TP304L ɗinmu marasa shinge don yanayin aiki mai kyau, suna ba da juriya ga tsatsa, ƙarfin inji, da kuma ingancin aiki mara misaltuwa.

2. Ka'idojin da suka dace

Ana ƙera bututun SA213-TP304L ɗinmu bisa ga ASTM A213/A213M, wanda ke ƙayyade tukunyar ferritic da austenitic alloy-steel boiler, superheater, da kuma hot-exchange bututan. Bugu da ƙari, samfuranmu sun cika buƙatun ASME Sashe na II don tasoshin matsin lamba kuma an ba su takardar shaida bisa ga ISO 9001:2015 da PED 2014/68/EU. Ana iya shirya dubawa na ɓangare na uku kamar TUV, SGS, Lloyd's Register, da DNV don tallafawa takaddun takamaiman aiki da kuma kula da inganci.

 

 

3. Girma da Tsarin Samfura

Womic Steel tana bayar da bututun SA213-TP304L a cikin girma dabam-dabam don dacewa da aikace-aikacen da aka saba da su:
- Diamita na waje: 6mm zuwa273.1mm (1/4" zuwa10")
- Kauri a Bango: 0.5mm zuwa 12mm
- Tsawon: Har zuwa mita 12 ko kuma an tsara shi bisa ga takamaiman takamaiman buƙatun abokin ciniki

Muna kuma bayar da juriya mai tsauri tare da karkacewar OD har zuwa ±0.05mm da daidaiton kauri bango har zuwa ±0.03mm. Layin samarwarmu yana tallafawa girman ma'auni da na imperial, tare da ayyukan yankewa, lanƙwasawa, da kuma beveling na musamman.

4. Sinadari da Kayan Inji

SA213-TP304L wani nau'in ƙarfe ne mai ƙarancin carbon wanda ke tabbatar da ingantaccen walda kuma yana rage haɗarin tsatsa tsakanin granular bayan walda. An daidaita tsarin sa sosai don tabbatar da inganci a cikin yanayin zafi mai yawa da lalata:

Tsarin Sinadaran da Aka Fi So:
- Carbon (C): ≤ 0.035%
- Chromium (Cr): 18.0–20.0%
- Nickel (Ni): 8.0–12.0%
- Manganese (Mn): ≤ 2.00%
- Silicon (Si): ≤ 1.00%
- Phosphorus (P): ≤ 0.045%
- Sulfur (S): ≤ 0.030%

Ƙarfin Inji:
- Ƙarfin Tashin Hankali: ≥ 485 MPa
- Ƙarfin Yawa: ≥ 170 MPa
- Tsawaitawa: ≥ 35%
- Tauri: ≤ 90 HRB

Wannan haɗin yana tabbatar da kyakkyawan aiki a cikin tsarin ɗaukar matsi, yanayin sinadarai masu ƙarfi, da kuma aikace-aikacen hawan zafi mai yawa.

5. Tsarin Masana'antu Mai Ci Gaba

An ƙera bututun SA213-TP304L na Womic Steel ta amfani da jerin matakan ƙera da aka tsara daidai gwargwado:

1. Zaɓin Kayan Danye: Muna samun billets daga masu samar da kayayyaki na cikin gida masu inganci. Ana tabbatar da duk kayan danye ta amfani da fasahar tantance kayan da suka dace (PMI).
2. Hudawa Mai Zafi: Fitar da zafi mai yawa yana haifar da yanayin rami, yana tabbatar da tsarin hatsi iri ɗaya da kuma daidaiton haɗin kai.
3. Zane Mai Sanyi: Wannan matakin yana ƙara haɓaka halayen injiniya, yana rage ƙaiƙayin saman, kuma yana kawo bututun zuwa girmansu na ƙarshe.
4. Ruwan da ke ƙara wa ruwa ƙarfi: Ana gudanar da shi a zafin 1050–1150°C sannan a kashe shi da sauri, wannan matakin yana rage damuwa a cikin jiki kuma yana inganta juriyar tsatsa.
5. Tsami da Tafarnuwa: Ana shafa saman bututun da sinadarin acid kuma ana shafa shi da sinadarai don dawo da wani tsari mai kariya daga iskar oxygen.
6. Daidaitawa da Girma: Ana ratsa bututu ta cikin injunan naɗawa da yawa don samun kamala mai girma kuma ana daidaita su bisa ga buƙatun oda.

6. Yarjejeniyar Gwaji Mai Tsauri

Domin tabbatar da inganci mai dorewa, Womic Steel ta aiwatar da cikakken gwaji na cikin gida da na ɓangare na uku:
Gwajin Hydrostatic: Yana tabbatar da ingancin kowane bututu a ƙarƙashin yanayin matsin lamba mai yawa.
Gwajin Eddy Current: Yana gano ƙananan fasa da katsewar bututun ba tare da lalata bututun ba.
Dubawar Ultrasonic: Yana duba daidaiton tsarin ciki kuma yana gano kurakurai da aka ɓoye.
Gwajin Tsatsa Tsakanin Granular (IGC): Yana tabbatar da juriya ga tsatsa bayan walda.
Gwajin Tauri da Tauri: Ana gwada kaddarorin injina bisa ga ASTM A370 don tabbatar da cikakken bin ƙa'idodi.
Duba Kammalawar Sama: Yana tabbatar da bin ƙa'idodin Ra ≤ 1.6μm (ko mafi kyau, bisa ga buƙata).

7. Takaddun shaida da Tabbatar da Inganci

Ana isar da kowane samfurin tare da cikakken Takaddun Shaidar Gwajin Injin (MTC) bisa ga EN 10204 3.1 ko 3.2. Masana'antar Womic Steel tana da takardar shaidar ISO 9001:2015, kuma mu masu samar da kayayyaki ne da aka amince da su ga kamfanonin EPC na duniya da yawa. Duk samfuran da suka shafi matsin lamba an ba su takardar shaidar ƙarƙashin Dokar Boiler and Pressure Vessels ta ASME da kuma Umarnin Kayan Aikin Matsi na Turai (PED).

8. Masana'antun Aikace-aikace

Ana amfani da bututun SA213-TP304L sosai a cikin:
Samar da Wutar Lantarki: Na'urorin dumama ruwa, masu sake dumama ruwa, da kuma masu sanyaya daki
Tsirrai Masu Sinadarai da Man Fetur: Layukan tsari da tasoshin matsin lamba
Magunguna: Tsarin tururi mai tsafta da tsarin WFI (Ruwa don allura)
Abinci da Abin Sha: Jigilar ruwa mai tsafta
Injiniyan Ruwa: Injinan musanya zafi da layukan sanyaya ruwan teku
Mai & Iskar Gas: Layukan watsa iskar gas da bututun hayaki na ƙasa
Juriyar tsatsa da kuma ikonta na jure matsin lamba na zafi mai zagaye sun sa ba makawa a cikin mawuyacin yanayi.

9. Zagayen Samarwa da Lokacin Isarwa

Womic Steel tana ba da jadawalin isar da kayayyaki ga masana'antu wanda ke da alaƙa da sarƙoƙin samar da kayayyaki masu inganci da kuma samar da kayayyaki masu yawa:
- Lokacin Gabatar da Samarwa na yau da kullun:15- Kwanaki 25 na aiki
- Isar da Sauri don Umarni na Gaggawa: Da sauri kamar kwanaki 10 na aiki
- Ƙarfin Samarwa na Wata-wata: Sama da tan 1200 na metric
- Kayan Kayan Danye: Sama da tan 500 na billets masu shirye don zana a cikin hannun jari
Wannan yana tabbatar da sassauci da aminci, koda kuwa a ƙarƙashin jadawalin aiki mai tsauri.

10. Marufi da Bibiya

Marufinmu yana tabbatar da cikakken kariya da kuma bin diddigin abubuwan da ke faruwa yayin jigilar kaya da ajiya:
- Murfin ƙarshen filastik yana hana gurɓatawa
- An haɗa shi kuma an naɗe shi da fim ɗin hana tsatsa da bel ɗin da aka saka
- Akwatunan katako ko pallets masu dacewa da ruwa don jigilar kaya a cikin kwantena
- Kowace fakiti da aka yiwa alama da lambar zafi, girma, kayan aiki, ID na rukuni, da lambar QR
Wannan yana bawa abokan ciniki damar bin diddigin kowane bututu zuwa yanayin samar da shi don cikakken bayyananne.

11. Ƙarfin Sufuri da Jigilar Kaya

Womic Steel tana aiki daga manyan tashoshin jiragen ruwa na kasar Sin, tana ba da kayayyaki masu inganci a duk duniya:
- Jigilar FCL da LCL tare da inganta kwantena
- Madaurin ƙarfe da sandunan katako don adana kaya
- Haɗin gwiwa da manyan masu jigilar kaya don isar da kaya akan lokaci
- Tallafin kwastam da kuma daidaita duba kafin jigilar kaya
Abokan ciniki suna amfana daga sabuntawar jigilar kaya a ainihin lokaci da kuma ingantattun ETAs.

12. Sarrafawa da Ƙerawa a Cikin Gida

Mun wuce masana'antar bututu ta hanyar bayar da ayyukan sarrafawa na musamman:
- Tsarin coil na U-bending da serpentine
- Ƙare beveling, zare, da fuska
- Ramin rami da huda bututun tacewa
- Goge saman (Ra ≤ 0.4μm don amfanin tsafta)
Waɗannan ayyukan da suka ƙara daraja suna kawar da buƙatar masu sayar da kayayyaki na biyu, suna adana lokaci da kuɗi ga abokan ciniki.

13. Me Yasa Zabi Karfe Mai Kauri?

Womic Steel yana ba da cikakken maganin bakin karfe tare da fa'idodi marasa misaltuwa:
- Samun kayan masarufi cikin sauri ta hanyar haɗin gwiwar masana'antu na dogon lokaci
- Layukan atomatik don zane, rufewa, da dubawa
- Injiniyoyin fasaha waɗanda suka yi aiki sama da shekaru 20 a fannin fasaha
- Sabis na abokin ciniki mai amsawa da tallafin harsuna da yawa
- Kula da inganci a wurin da kuma bin diddiginsa 100%
Daga samfurin samfur zuwa babban samarwa, muna tabbatar da aminci, daidaito, da gamsuwar abokin ciniki.

Zaɓi Womic Steel Group a matsayin abokin tarayya mai aminciBakin Karfe bututuda kuma aikin isar da sako mai ban mamaki. Barka da zuwa Tambaya!

Yanar Gizo: www.womicsteel.com

Imel: sales@womicsteel.com

Waya/WhatsApp/WeChat: Victor: +86-15575100681 ko Jack: +86-18390957568