Bayanin Samfura - Menene Tukunyar Slag?
A tukunyar tarkace(wanda kuma aka sani dacokali mai kauri, bokitin slag, Tukunyar cinder or tukunyar shara) wani muhimmin jirgin ruwa ne na ƙarfe da ake amfani da shi a masana'antar ƙarfe da masana'antar yin ƙarfe don tattarawa, jigilarwa, da kuma zubar da narkakken tarkacen da aka samar a lokacin aikin yin ƙarfe. Waɗannan na'urorin ɗaukar nauyi masu ɗauke da kaya suna daakwati mai siffar kwano mai ƙwanƙwasaa ɓangarorin biyu don sarrafa crane da ayyukan tipping.yanayin zafi ya wuce 1,600°CTukwanen da aka yi da tarkace suna buƙatar juriyar zafi mai kyau, ƙarfin injina, da kwanciyar hankali na tsari don jure wa girgizar zafi mai tsanani, tsatsa mai narkewa, da tasirin injina yayin maimaita zagayowar aiki.
Tukwanen slag galibi ana amfani da su ne don ɗaukar slag ɗin ƙarfe mai juyawa, slag ɗin tanda mai tacewa (LF/VD), da kuma ɗimbin ɗigon kwalaben da aka zubar daga ayyukan ɗigon da ake ci gaba da yi. Yawanci ana ƙera su ne dagakayan ƙarfe da aka yi da simintikamar ZG230-450 da ZG270-500,Tanderun tacewa na LF da kuma cire gas ɗin injin VDfasahar samarwa, tare da ingantaccen tsarin simintin ta hanyarKwaikwayon software na CAE.
Me Yasa Za Ku Zabi Womic Steel A Matsayin Mai Kaya Tukunyarku?
Fasaha Mai Ci Gaba ta Fitar da Zane– Yi amfani da manhajar kwaikwayon simintin Huazhu CAE don nazarin tsarin ƙarfafawa, tabbatar da ingantaccen tsarin da babu lahani a cikin simintin.
Karfe Mai Tsabta Mai Tsabta– Haɗa gyaran farko na EAF da gyaran ladle na LF don rage haɗarin da ke tattare da cutarwa (S ≤ 0.020%, P ≤ 0.020%), tsaftace tsarin hatsi, da kuma samar da ƙarfin ƙarfe mai kyau.
Tsarin Kula da Inganci Mai Tsauri– Cikakken tsarin gudanarwa mai inganci a ƙarƙashin ISO 9001:2015, cikakkun rahotannin dubawa gami da nazarin sinadarai, gwajin tensile, da takaddun NDT tare da takaddun shaida na EN 10204 3.1 ko 3.2.
Tsawon Rayuwar Sabis– An ƙera shi don dorewa, tukwanen Womic slag suna ba da ingantaccen aikifiye da zagaye 5,000ta hanyar halayen injina masu zafi mai yawa, kyakkyawan juriya ga fashewar zafi, da kuma tsarin masana'antu mai dorewa.
Binciken NDT Mai Tsauri- Trunnions suna fuskantar hatsariGwajin Ultrasonic mai zurfin 500mmdon tabbatar da babu lahani a cikin ciki, tare da ƙa'idodin Mataki na 1 don trunnions da Mataki na 3 don jikin tukunya.
Keɓancewa Mai Sauƙi- Cikakken iyawa, girma, kayan aiki, da kuma kammala saman bisa ga zane-zanen abokin ciniki da yanayin aiki.
Ingancin Jefawa Ɗaya– Duk tukwanen mu na slag ana samar da su ne a cikinguda ɗaya, siminti ɗayatsari (simintin haɗaka), kawar da dinkin walda wanda zai iya zama wuraren gazawa yayin da ake maimaita lodin girgiza mai zafi.
Saurin Zagayewar Samarwa– Ingancin tsarin masana'antu tare da ingantaccen jigilar kaya na duniya.
Gwaninta na Fitar da Kaya a Duniya– Kamfanonin ƙarfe a faɗin duniya sun amince da shiKasashe 23+a duk duniya.
Womic Steel tana aiki kai tsaye tare da abokan ciniki don tsara da ƙera tukwanen slag bisa ga takamaiman buƙatunsu. Ta amfani da ƙididdigar ma'aunin masana'antu da kumaBinciken Abubuwan da Aka Cika (FEA), muna tabbatar da cewa kowace tukunyar slag ta cika ainihin buƙatunku na ɗagawa, kauri, da kuma yanayin ƙasa.
Bayanan Fasaha - Sigogi na Tukunyar Slag
An tsara tukwanen mu na slag, an ƙera su, kuma an gwada su bisa ga ƙa'idodin ƙasashen duniya, ciki har daASTM A27 (60-30 Grade), DIN 17182 (GS-16Mn5), BS 3100 (425-A2), JIS G7821 (SC42), da ISO 3755 (230-450 Grade).
Zaɓuɓɓukan Ma'aunin Kayan Aiki
| Kayan Aiki | Daidaitaccen Daidaitacce | Ƙarfin Taurin Kai (MPa) | Ƙarfin Yawa (MPa) | Tsawaita (%) |
| ZG230-450 | ISO 3755:1991 230-450 | ≥450 | ≥230 | ≥22 |
| ZG270-500 | ISO 3755:1991 270-500 | ≥500 | ≥270 | ≥18 |
| ZG310-570 | ISO 3755:1991 310-570 | ≥570 | ≥310 | ≥15 |
| ZG340-640 | ISO 3755:1991 340-640 | ≥640 | ≥340 | ≥12 |
| GS-16Mn5 | DIN 17182 | 480-630 | ≥300 | ≥22 |
| ASTM A27 60-30 | Matsayin Amurka | ≥414 | ≥207 | ≥24 |
| 35CrMo / 40Cr (Trunnion) | JB/T6396-2006 | ≥980 | ≥785 | ≥9 |
Bukatar Kayayyakin Inji na Karfe (Bisa ga ASTM/ISO)
| Kadara | Ma'aunin Amurka (ASTM A27) | Matsayin Turai (ISO 3755/DIN) |
| Ƙarfin Tauri (minti) | 414 MPa (60,000 psi) | 448 MPa (65,000 psi) |
| Ƙarfin Yawa (minti) | 207 MPa (30,000 psi) | 241 MPa (35,000 psi) |
| Tsawaita (minti) | Kashi 24% | Kashi 35% |
| Rage Yanki | Kashi 35% | Kashi 40% |
Zaɓuɓɓukan Ƙarfi & Girma
| Kewayon Ƙarfin Aiki | Nisa Nauyi | Girman Girma | Girma (L×W×H) |
| Tan 5-10 | Tan 7-15 | 4-10 m³ | An keɓance shi ga kowane zane |
| Tan 10-30 | Tan 15-35 | 8-25 m³ | An keɓance shi ga kowane zane |
| Tan 30-60 | Tan 25-50 | 15-40 m³ | An keɓance shi ga kowane zane |
| Tan 60-85 | Tan 40-75 | 25-50 m³ | An keɓance shi ga kowane zane |
| Tan 80-100+ | Tan 60-80+ | 35-60+ m³ | An keɓance shi ga kowane zane |
*Aikin simintin guda ɗaya mai nauyin tan 300 yana samuwa don yin oda na musamman.*
Bayanin Trunnion
| Sigogi | Bukatar |
| Kayan Aiki | 35CrMo ko 40Cr ƙarfe mai ƙarfe |
| Daidaitacce | JB/T6396-2006 |
| Bukatar NDT | Mataki na 1 a kowace JB/T5000.14-1998 |
| Zurfin Gwaji | Gwajin Ultrasonic a cikin kewayon 500mm |
| Maganin Zafi | An huce kuma an huce |
Yanayin Maganin Zafi
| Yanayi | Aikace-aikace |
| An daidaita | Yanayin isarwa na yau da kullun, rage damuwa |
| Daidaita + Mai ƙarfin hali | Ingantaccen halayen injiniya, ingantaccen tauri |
| An rufe | Don buƙatu na musamman, matsakaicin sassauci |
| An kashe + Mai ƙarfin hali | Ƙarfi mafi girma da juriyar lalacewa |
Ma'aunin Ƙarshen Fuskar
| Nau'in Ƙarshe | Ƙayyadewa | Aikace-aikace |
| Tsarin Aiki na Ciki | ASTM A802 MATAKI NA 3 (mai santsi, babu mannewa a kan slag) | Yana hana taruwar tarkace da kuma mannewa |
| Fuskar waje | Harbin bindiga + shafi mai jure zafi mai launin azurfa | Kare daga lalacewar iskar shaka da sufuri |
Juriyar Girma
| Sigogi | Haƙuri |
| Girman Gabaɗaya | ±10mm |
| Kauri a Bango | ±12.5% |
| Daidaito Tsakanin Trunnion | ±5mm |
| Tsarin haɗin gwiwa na Trunnion | ≤3mm |
Tsarin Dubawa & Gwaji - Garantin Kula da Ingancinmu
Don tabbatar da dukkantukunyar slag ta musammanya cika ƙa'idodin aminci da aiki na ƙasashen duniya, Womic Steel ta bi ƙa'idodi masu tsauriTsarin aiki na matakai 8 na sarrafa inganci:
| Mataki | Dubawa / Gwaji | Na yau da kullun / Kayan aiki | Ka'idojin Karɓa |
| 1 | Tabbatar da Kayan Danye | Na'urar auna siginar OBLF GS1000 | Tsarin sinadarai ga kowane matakin da abokin ciniki ya ƙayyade (ASTM, DIN, ISO) |
| 2 | Duba Girman Aiki | Na'urar bin diddigin Laser / CMM | ±10mm akan girman gabaɗaya, ±5mm akan matsayin trunnion |
| 3 | Kulawa da Kula da Zafi | Murhun gas na halitta tare da rikodin zafin jiki mai ci gaba | Ana iya bin diddigin lanƙwasa na lokaci-zafi gaba ɗaya |
| 4 | Gwajin Ultrasonic (UT) | JB/T5000.14-1998 | Trunnion: Mataki na 1 (zurfin duba 500mm); Jiki: Mataki na 3 |
| 5 | Gwajin Magnetic Barbashi (MT) | GB/T 9444 | Babu alamun layi > 2mm akan saman mahimmanci |
| 6 | Gwajin Shiga Jiki (PT) | GB/T 9443 | Gano fashewar saman - sifili ya yarda |
| 7 | Gwajin Inji | Taurin kai / Tasiri / Tauri | Ya dace da buƙatun da suka shafi maki na musamman. |
| 8 | Sakin Kayayyaki na Ƙarshe da Girma | Zane da aka gina tare da rahoton duba | 100% damar ganowa zuwa lambar zafi |
An bayar da takardar shaidar:EN 10204 Nau'i na 3.1 (daidaitacce) ko Nau'i na 3.2 (tare da shaida ta ɓangare na uku). Ana adana duk bayanan NDT na tsawon shekaru 10.
Tsarin Kera Tukwanen Mu - Yadda Ake Yin Tukwanen Mu Na Slag
Namusiminti ɗaya(haɗaɗɗen siminti) tsari yana tabbatar da ginawa mai santsi, ba tare da walda ba wanda ke samar da aminci mara misaltuwa a cikin yanayin zafi mai yawa.
Zane & Kwaikwayo– Yi amfani da manhajar kwaikwayon simintin Huazhu CAE don yin nazari da inganta tsarin ƙarfafawa, tabbatar da ingancin tsarin da kuma rashin lahani na siminti.
Yin Tsarin Katako– Yi ƙirar ƙirar katako daidai gwargwado bisa ga ƙa'idodin abokin ciniki da ƙa'idodin aminci.
Ginawa (Gyara yashi)– Yi amfani da yashi mai ɗaure da resin ko yashi mai silica don yin manyan siminti masu rikitarwa.
Tsarin Trunnion– Ana amfani da na'urorin da ke ƙara zafi sosai wajen haɗa ƙarfe da ƙarfe, waɗanda aka ƙera daga S355 J2G3 zuwa DIN EN 10250-2, don tabbatar da ingancin ciki da kuma rage yuwuwar tsagewa.
Narkewa da Tsaftacewa– Narkewa a cikin Wutar Lantarki ta Arc (EAF), sai kuma tace ladle da kuma cire gas daga VD don rage yawan abubuwan da ke cikin S, P, H, da N (S ≤ 0.020%, P ≤ 0.020%). OBLF GS1000 spectrometer mai karanta kai tsaye wanda ake amfani da shi don sarrafa sinadaran da suka dace kafin, lokacin, da kuma bayan narkewa.
Zubawa Guda Ɗaya (Zobe Ɗaya)– An zuba dukkan tukunyar da aka yayyankaaiki ɗaya mai ci gaba da zubar ƙasatare da saurin sarrafawa; Ƙarfafawa da aka yi da CAE yana tabbatar da ingantaccen tsarin hatsi ba tare da dinkin walda ba.
Maganin Zafi– Daidaita / Daidaita + Daidaita don kawar da damuwa na simintin, tabbatar da tsarin ciki iri ɗaya, hana lalacewa da tsagewa. Murhun dumama iskar gas na halitta yana tabbatar da rarraba yanayin zafi iri ɗaya.
Fettling & Kammalawa- Cire masu ɗagawa, niƙa saman don ya yi laushi, harbin fashewar waje, aikin ciki na injin zuwa ASTM A802 LEVEL 3, hana mannewa.
Duba Inganci & NDT- Cikakken bincike mai zurfi, nazarin sinadarai, gwajin injiniya, da gwajin da ba zai lalata ba, gami da UT, MT, da PT.
Shafi & Marufi– A shafa fenti mai hana ruwa shiga da launin azurfa-toka a saman waje; a marufi bisa ga ƙa'idodin teku tare da kariyar firam ɗin ƙarfe.
Marufi & Jigilar Kaya - Isarwa Lafiya a Duk Duniya
Womic Steel yana tabbatar da kowanetukunyar slag ta musammanan kare shi yadda ya kamata don jigilar kaya na ƙasashen waje, musamman ga manyan kayan jefa abubuwa masu nauyi.
Ka'idojin Marufi
| Mataki | Hanyar | Kariya |
| 1 | Kariyar Fuskar | Man hana tsatsa + fim ɗin filastik a saman injina (kwano na ciki, kujerun trunnion) |
| 2 | Kariyar Gefen | Masu tsaron kusurwa na ƙarfe a kan ɗaga trunnions da gefuna masu mahimmanci |
| 3 | Cushioning | Tabarmar roba da dunnage na katako tsakanin tukwane na karya (idan an tara raka'a da yawa) |
| 4 | Tallafin Tushe | Sirdi na ƙarfe da aka ƙera musamman tare da maƙullan bel don hana birgima |
| 5 | Naɗewa ta waje | Tafkin ruwa mai hana ruwa shiga tare da jakunkunan busassun kaya don sarrafa danshi |
| 6 | Akwati / Rack ɗin Faɗi | An ɗaure shi da madaurin ƙarfe, maƙallan sarka, da makullan murɗawa (ISO 1496-1) |
Zaɓuɓɓukan jigilar kaya
An haɗa da kwantena– Don matsakaicin girma (har zuwa 12T a kowace naúra) a cikin kwantena masu girman ƙafa 20 ko ƙafa 40.
Faɗin Raki / Akwati Mai Buɗewa Sama– Don manyan tukwane na slag (> 12T) don ba da damar ɗaukar crane sama.
Babban Hutu / RORO- Don tukwanen da suka yi nauyi ko kuma suka yi girma (≥ 20T), a ɗora su kai tsaye tare da katakon ɗagawa na musamman.
Ayyukan jigilar kaya na aikin– Don jigilar kayayyaki daga masana'antar ƙarfe gaba ɗaya, muna haɗa kai da masu jigilar kaya don isar da kaya daga ƙofa zuwa ƙofa.
An bayar da Takardun Jigilar Kaya
● Jerin Lissafin Kasuwanci da Shiryawa
● Takardar Kudin Jigilar Kaya (Teku/Jirgin Sama)
● Takardar Shaidar Asali (Form E, COO kamar yadda ake buƙata)
● Takaddun shaida na Gwajin Mill (EN 10204 3.1 / 3.2)
● Rahotannin NDT (UT, MT, PT)
● Hotunan Rikodin Alama & Girma
● Takardar Shaidar Inshora (idan an buƙata)
Bayar da Ingantaccen Aiki
Lura: Lambobin da ke ƙasa suna wakiltar ayyukan gaske da Womic Steel ta kammala cikin nasara. An cire takamaiman sunayen abokan ciniki don sirri. Ana samun cikakkun bayanai game da shari'o'i da bayanan ziyarar abokin ciniki idan an buƙata.
Shari'a ta 1: Tukunyar Siminti Mai Nauyin Tan 85 don Masana'antar Karfe ta Kudu maso Gabashin Asiya
Bayanin Aikin:
Wani babban injin niƙa na ƙarfe da aka haɗa a Kudu maso Gabashin Asiya ya buƙaci maye gurbin tukunyar da aka haɗa da slag da ke akwai wadda ta lalace bayan watanni 8-12 saboda tsagewar zafi mai tsanani a ƙarƙashin sarrafa slag na EAF (1,650°C).
Maganin Mata:
An tsara shi da FEA don inganta kauri bango da tsarin trunnion.
An ƙera ta hanyartsarin simintin guda ɗaya(babu dinkin walda).
Kayan aiki: GS-16Mn5 daidai yake da LF+VD na cire gas (S ≤ 0.015%, P ≤ 0.018%).
Gwajin Ultrasonic 100% (UT) akan wurare masu mahimmanci; an duba trunnions zuwa zurfin mm 500.
Shaidar dubawa ta ɓangare na uku daga SGS.
Sakamakon da aka bayar:
Rayuwar sabis ta wuceWatanni 28(har yanzu yana aiki a ƙarshe a bin diddigin).
Ba a gano tsagewar zafi ba bayan zagayowar sama da 4,200.
Abokin ciniki ya sanyamaimaita umarnidon ƙarin raka'a.
Shari'a ta 2: Ladulu masu sassauƙa masu ƙarancin zafin jiki ga mai kera ƙarfe na Rasha
Bayanin Aikin:
Ƙungiyar ƙarfe ta Rasha tana buƙatar kwalaben tarkace waɗanda za su iya jure yanayin hunturu mai tsanani (zafin yanayi ƙasa da -35°C) ba tare da haɗarin karyewar karyewa ba.
Maganin Mata:
An zaɓi ƙarfe mai ƙarancin carbon wanda ke da tabbacin tasirin tasirin zafi mai ƙarancin zafi (≥27J a -40°C).
Maganin zafi: Daidaita + Mai zafi tare da zagayowar sanyaya mai sarrafawa.
Trunnions sun kasancejefa cikin haɗin gwiwata amfani da kayan 35CrMo.
Cikakken takardar shaida ta TÜV (EN 10204 Type 3.2).
Sakamakon da aka bayar:
Duk na'urori sun ci jarrabawar tasirin ƙasa da sifili.
Ci gaba da aiki ba tare da matsala ba don fiye daShekaru 5a cikin yanayin Siberia.
Shawarwari daga wasu masu yin ƙarfe na yankin.
Shari'a ta 3: Tukwanen Slag da Aka Inganta Nauyi Don Masana'antar Karfe ta Arewacin Amurka
Bayanin Aikin:
Kamfanin ƙarfe da ke Amurka yana da ƙarancin ƙarfin crane (mafi girman ɗagawa tan 40), don haka tukwanen slag na yau da kullun ko dai sun yi nauyi sosai ko kuma sun yi ƙanƙanta sosai.
Maganin Mata:
An gudanar da inganta yanayin jiki bisa CAE don rage kiba yayin da ake kiyaye lafiyar jiki.
An cimmaRage nauyi kashi 18%idan aka kwatanta da zane-zane na gargajiya.
Kayan aiki: ZG310-570 tare da maganin hatsi mai kyau.
An yi amfani da dukkan wuraren zama da kuma ramukan trunnion don samun cikakkiyar damar musanya.
Sakamakon da aka bayar:
An rage lokacin zagayowar crane ta hanyar12%.
Umarni na farko na raka'a 8 (2022) → umarni na biyu na raka'a 12 (2023) → umarni na uku na raka'a 16 (2024).
Wannan ƙirar da aka inganta yanzu ana bayar da ita azaman misali ga buƙatun aji na tan 30.
Za a iya raba ƙarin shari'o'in da aka bayar (gami da hotuna, rahotannin dubawa, da wasiƙun bayanin abokin ciniki) bayan sanya hannu kan yarjejeniyar rashin bayyana bayanai. Womic Steel ta bayar datukwane sama da 500 na slagzuwa masana'antun ƙarfe, masana'antun hakar ma'adinai, da masana'antun ƙarfe a duk duniya.
Aikace-aikace - Inda ake Amfani da Tukwanen Slag ɗinmu
Karfe Mai Kyaukwalaben slagana amfani da su sosai a cikin:
Cibiyoyin Sarka da Ayyukan Yin Ƙarfe- don sarrafa da jigilar slag na converter
Masana'antar Ƙarfe- don sabis na tanderun lantarki da tanderun tacewa na LF
Masana'antun Gine-gine da Gine-gine- don tattarawa da zubar da tarkace
Ayyukan Haƙar Ma'adinai- don sarrafa slag da jigilar kaya
Masana'antun Sinadarai- don sarrafa slag mai zafi sosai
Samar da Karfe mara ƙarfe- don sarrafa slag na tagulla da aluminum
Tambayoyin da Ake Yawan Yi (FAQ)
T: Menene ma'anar "siminti ɗaya" ko "simintin haɗaka" ga tukunyar da aka yi da tarkace?
A: Yana nufin dukkan tukunyar slag - gami da kwano da trunnions - ana zuba su a cikin aiki guda ɗaya ba tare da wani walda ba daga baya. Wannan yana kawar da dinkin walda wanda zai iya fashewa a ƙarƙashin girgizar zafi kuma yana tsawaita rayuwar sabis sosai.
T: Wane abu ne ya fi dacewa da tukwanen slag?
A: Kayan da aka fi amfani da shi kuma mai rahusa shineƙarfe mai siminti(ZG230-450, ZG270-500), wanda ke ba da kyawawan halaye na injiniya masu zafi, juriya mai kyau ga tsagewar zafi, da kuma sauƙin walda don gyarawa. Don ƙarin ƙarfi ko aikace-aikacen lalata, muna kuma bayar da matakan ƙarfe na ƙarfe kamar GS-16Mn5 kowace DIN 17182 ko ASTM A27 60-30.
T: Har yaushe tukunyar slag take ɗauka?
A: An ƙera shi da kyautukunyar ƙarfe mai kaurizai iya ɗorewasama da zagaye 5,000idan aka yi amfani da shi yadda ya kamata kuma aka kula da shi yadda ya kamata. Tare da gina siminti ɗaya, matsakaicin rayuwa na iya wuce zagaye 8,000 a cikin masana'antu da yawa. Dubawa akai-akai (kowane amfani 200) da kuma kula da rufin da ya dace yana ƙara tsawon rayuwar sabis.
T: Wane irin tukunya mai ƙarfi ne Womic Steel zai iya samarwa?
A: Muna samarwaTukwane na musamman na slagtare da iyawa iri ɗaya dagaTan 5 zuwa 100+, mai nauyin kimanin tan 7 zuwa 80+, tare da juzu'i daga m³ 4 zuwa m³ 60 da sama da haka. Tsarin jefawa ɗaya yana samuwa har zuwa tan 300.
T: Shin Womic Steel zai iya samar da tukwane na slag da aka yi bisa ga ƙa'idodin ƙasashen duniya?
A: Eh. Muna ƙera tukwanen da suka dace daASTM A27, DIN 17182 (GS-16Mn5), BS 3100 (425-A2), JIS G7821 (SC42), ISO 3755ƙa'idodi.
T: Wadanne takaddun shaida da takardu kuke bayarwa?
A: Muna bayarwaTakardar Shaidar Gwajin Injin bisa ga EN 10204 Nau'in 3.1 (ko 3.2 bisa buƙata)gami da abubuwan da suka shafi sinadarai, halayen injiniya, da sakamakon NDT; duba girma tare da zane-zanen da aka gina; jadawalin rikodin maganin zafi; da rahotannin NDT (UT, MT, PT). Don ayyukan da ke da duba ɓangare na uku, muna bayar da takaddun shaida 3.2 waɗanda TÜV, SGS, BV, da sauransu suka tabbatar.
T: Yaya tsawon rayuwar tukunyar ƙarfe da aka yi da ...
A: Tare da zaɓin kayan da ya dace (ƙarfe simintin ƙarfe), rayuwar sabis ɗin na iya zamasau uku zuwa huɗu mafi kyauidan aka kwatanta da madadin ƙarfen siminti. Haka kuma ƙarfen siminti yana ba da kyakkyawan damar gyara ta hanyar walda.
T: Za a iya gyara ko maye gurbin trunnions ɗin?
A: Ana yin amfani da sandunan ƙarfe a matsayin abubuwan haɗin gwiwa. Duk da haka, ƙarfen da aka yi da siminti ya dace da walda, ba kamar ƙarfen da aka yi da siminti ba. Don mummunan lalacewa, tuntuɓi ƙungiyar injiniyanmu don shawarwarin gyara.
T: Za a iya samar da tukwane na slag tare da rufin da aka keɓance?
A: Eh. Za mu iya amfani da nau'ikan gyaran fuska daban-daban, ciki har da fenti mai jure zafi mai zafi (launin toka-azurfa), fenti mai hana mannewa don saman ciki don hana mannewa, da kuma fenti mai kariya daga tsatsa don takamaiman yanayin aiki.
T: Ta yaya zan zaɓi madaidaicin ƙarfin tukunyar slag don injina na ƙarfe?
A: Zaɓin ƙarfin ya dogara da: girman tanda da nau'in (BOF/EAF/LF), ƙimar samar da slag a kowane zafi, kayan aikin sarrafa masana'antu da kayan aiki (ikon crane, hanyar sufuri), da ƙuntatawa a wurin. Ba mu sigogin aikinku, kuma za mu ba da shawarar mafi kyawun ƙarfin aiki.
T: Za a iya samar da tukwane na slag tare da shirye-shiryen ɗagawa na musamman?
A: Eh. Muna tsarawa da ƙerawa bisa ga takamaiman buƙatun tsarin ɗagawa, gami da salon trunnion daban-daban (wanda aka jefa ko aka ɗaure), tallafawa ƙirar ƙafa, daidaita hannun da aka karkatar, da fasalulluka na aminci waɗanda suka dace da ƙa'idodin ɗagawa na gida da na ƙasashen waje.
Shin kuna shirye don samun ƙiyasin farashin aikin tukunyar ku ta slag?
Tuntuɓi Womic Steel a yau donfarashi mai gasa, goyon bayan sana'a, kumaisarwa da sauri of Tukwane na musamman, waɗanda aka yi da siminti ɗaya.
Womic Steel - Mai ƙera da mai samar da tukunyar Slag mai aminci a China
Yanar Gizo: www.womicsteel.com
Imel: sales@womicsteel.com
Waya/WhatsApp/WeChat:
Victor: +86 15575100681
Jack: +86 18390957568
Womic Steel tana aiki kai tsaye tare da abokan ciniki don tsara da ƙera tukwanen slag bisa ga takamaiman buƙatunsu. Ta amfani da ƙididdigar masana'antu da nazarin abubuwa masu iyaka, muna tabbatar da cewa kowace tukwanen slag ta cika ainihin buƙatunku na injiniyanci, aminci, da aiki.
Kayayyaki Masu Alaƙa
-
Jagorar Zaɓin Kayan Tukunyar Slag: ZG270-500, G...
-
Mai Kera Tukunyar Slag | Mai Nauyin Siminti Mai Nauyi S...
-
Tukunyar LF/VD Slag | Ladle Fired Slag na Musamman...
-
Babban Mai Kera Tukunyar Slag | Mai Nauyin Aiki 60-100...
-
Yadda Ake Tsawaita Rayuwar Sabis na Tukunyar Slag: Gyara...
-
Tukunyar EAF Slag | Wutar Lantarki ta musamman...
-
Ladle na Slag | Mai ƙera Ladle na Karfe – Wo...
-
Tukunyar slag mai nauyin tan 20-50 | Matsakaicin ƙarfin slag...
-
EN 10219 S460MH ERW Karfe bututu - Matsakaicin ƙarfi