Inconel 718 (UNS N07718) – Alloy na Nickel-Chromium mai taurarewa don Amfani Mai ƙarfi

Takaitaccen Bayani:

Inconel 718 (UNS N07718 /W.Nr. 2.4668 / GH4169) wani ƙarfe ne mai taurare da ruwa mai ƙarfi wanda ke da ƙarfin zafin jiki mai yawa da juriya ga tsatsa. Womic Steel yana samar da Inconel 718 a cikin nau'ikan samfura da yawa ciki har da bututu mara sumul, bututun walda, sandar ƙarfe, farantin ƙarfe, na'urar ƙarfe, tsiri, flanges, kayan haɗi, kayan ƙira, waya, manne, da bawuloli don aikace-aikacen sararin samaniya, injin turbine na iskar gas, na ruwa, makaman nukiliya, da mai da iskar gas.

Aika mana imel Bayanin Samfura

Cikakken Bayani game da Samfurin

Alamun Samfura

Bayanin Samfuri

Inconel 718 ita ce mafi yawan amfani da sinadarin nickel a duniya, wanda galibi ake siffanta shi da "dokin aiki" na ƙarfe masu zafi. Kamfanin Nickel na Duniya ya ƙirƙiro shi a shekarun 1950, ƙarfen yana samun ƙarfinsa na musamman ta hanyar hazo na matakan γ″ (Ni₃Nb) da γ′ (Ni₃(Al,Ti)) yayin maganin zafi mai tsufa sau biyu. Tare da ƙarfin tauri da ya kai 1,275-1,380 MPa, Inconel 718 yana ba da ɗaya daga cikin mafi girman rabon ƙarfi-da-nauyi tsakanin ƙarfen nickel yayin da yake kiyaye ingantaccen ƙira da sauƙin haɗawa.

Muhimman halaye sun haɗa da:

Ƙarfin zafin jiki na musammanhar zuwa 700°C (1300°F)
Taurarewar ruwan samata hanyar samuwar γ″ da γ′ a lokacin tsufa
Kyakkyawan juriya ga fashewaa 650-700°C
Kyakkyawan juriya ga iskar shaka da tsatsaa cikin mahalli daban-daban
Juriyar gajiya mai ban mamakida kuma taurin karyewa
Kyakkyawan iya aiki da walda- ɗaya daga cikin mafi kyawun superalloys na nickel
Faɗin ƙarfin zafin jikidaga cryogenic (-253°C) zuwa 700°C

Sinadarin Sinadarai

Sinadarin	Abun ciki (%)	Matsayin
Nickel (Ni)	50.0 – 55.0	Tushen abu, yana ba da kwanciyar hankali na austenitic da juriya ga SCC
Chromium (Cr)	17.0 – 21.0	Juriyar iskar oxygen, tana samar da sikelin kariya na Cr₂O₃
Baƙin ƙarfe (Fe)	Daidaito	Sinadarin tushe mai inganci, yana shiga cikin ƙarfafa mafita mai ƙarfi
Niobium + Tantalum (Nb+Ta)	4.75 – 5.50	Babban matakin ƙarfafawa γ″ (Ni₃Nb), mai bambancewa mai mahimmanci
Molybdenum (Mo)	2.80 – 3.30	Ƙarfafa mafita mai ƙarfi, juriya ga rarrafe
Titanium (Ti)	0.65 – 1.15	γ′far samuwar lokaci (Ni₃Al,Ti), ƙarfafa na biyu
Aluminum (Al)	0.20 – 0.80	Tsarin γ′, juriya ga iskar shaka
Cobalt (Co)	≤ 1.00	Sauran sinadari, yana taimakawa wajen ƙarfafa maganin da ya dace
Carbon (C)	≤ 0.08	Tsohon Carbide, ƙarfafa iyakar hatsi
Manganese (Mn)	≤ 0.35	Mai cire sinadarin sinadarai (Deoxidizer)
Silikon (Si)	≤ 0.35	Mai cire sinadarin sinadarai (Deoxidizer)
Phosphorus (P)	≤ 0.015	Rashin tsafta, an sarrafa shi sosai
Sulfur (S)	≤ 0.015	Rashin tsafta, an sarrafa shi sosai
Boron (B)	≤ 0.006	Ƙarfafa iyakokin hatsi, yana inganta juriya ga ƙwanƙwasawa
Tagulla (Cu)	≤ 0.30	Sauran abu

Kayayyakin Inji

Halayen Zafin Ɗaki (Yanayin Tsufa)

Kadara	Bukatar ASTM	An Cimma Nau'in da Aka Saba
Ƙarfin Taurin Kai	≥ 1,240 MPa (180 ksi)	1,275 – 1,380 MPa
Ƙarfin Yawa (Kashi 0.2% na rangwame)	≥ 1,034 MPa (150 ksi)	1,030 – 1,170 MPa
Ƙarawa	≥ 12%	12 – 25%
Tauri	—	36 – 44 HRC
Yawan yawa	8.19 g/cm³
Narkewar Nisa	1,260 – 1,340°C
Modulus mai laushi	200 GPa a 20°C
Tsarin kwararar zafi	11.4 W/m·K a 20°C
Na'urar Magnetic Perfusion	Ba maganadisu ba

Halayen Injin Zafi Mai Girma

Zafin jiki °C	Ƙarfin Taurin Kai (MPa)	Ƙarfin Yawa (MPa)
20	1,275 – 1,380	1,030 – 1,170
540	1,150	960
650	1,030 – 1,100	850 – 860
700	—	700

Ƙarfin Rage Ragewa

Zafin jiki	Damuwa (MPa)	Rayuwar Rushewa
650°C	690	> Awowi 100
700°C	620	> Awowi 100
650°C	586	> awanni 1,000

Muhimman Fa'idodin Inconel 718

Tsarin Taurarewar Ruwan Sama– Inconel 718 yana samun ƙarfinsa ne daga ruwan sama na matakan γ″ (Ni₃Nb) da γ′ (Ni₃(Al,Ti)) yayin maganin zafi na tsufa. Matakin γ″ shine babban tsarin ƙarfafawa, tare da ƙaramin juzu'i yana kaiwa kusan 12-20%. Ba kamar sauran ƙarfe masu taurarewa da yawa ba, Inconel 718 yana da saurin tsufa, yana ba da taga mai faɗi da kuma kyakkyawan damar walda.

Ƙarfin Zafin Jiki Mai Kyau– Inconel 718 yana da ƙarfin juriya mai yawa, gajiya, da kuma karyewar iska har zuwa 700°C (1300°F). A zafin 650°C, ƙarfin fitarwa ya fi na sauran superalloys da aka ƙera. Alloy ɗin yana nuna kyakkyawan juriyar rarrafe a cikin kewayon 650-700°C, wanda hakan ya sa ya zama abin da aka fi so don sabis na zafin jiki mai tsawo na dogon lokaci.

Kyakkyawan Weldability– Ana ɗaukar Inconel 718 a matsayin mafi kyawun ƙarfe mai amfani da nickel. Ba kamar sauran ƙarfe masu taurarewa waɗanda ke iya haifar da fashewar tsufa ba, ana iya haɗa Inconel 718 a cikin yanayi mai annashuwa da tsufa ba tare da wata babbar haɗari ba. Alloy ɗin yana nuna kyakkyawan juriya ga fashewar da walda ke haifarwa kuma ana iya haɗa shi ta amfani da TIG, MIG, electron beam, da kuma hanyoyin walda na laser. Haɗaɗɗun haɗin da aka haɗa galibi suna samun ƙarfin ƙarfe na kusa da iyaye tare da maganin tsufa mai sauƙi bayan walda.

Faɗin Zafin Jiki– Gilashin yana kiyaye daidaiton sifofi daga yanayin zafi mai zafi (-253°C) har zuwa 700°C. A yanayin zafi mai zafi, ƙarfi da tauri suna ƙaruwa ba tare da canjin ductile-to-brittle ba, wanda hakan ya sa ya dace da tsarin hydrogen na ruwa da iskar oxygen. Wannan kewayon aiki mai faɗi ba kasafai yake faruwa ba a tsakanin superalloys.

Kyakkyawan Juriyar Tsatsa– Tare da kashi 17-21% na sinadarin chromium, Inconel 718 yana ba da kyakkyawan juriya ga tsagewar iskar shaka, tsagewa, da tsagewar da ke haifar da matsala a wurare daban-daban. Gilashin yana aiki sosai a cikin ruwan teku, feshin gishiri, kafofin watsa labarai na acidic, da kuma yanayin iskar shaka mai zafi. Ƙarancin sinadarin cobalt (≤1.0%) ya sa ya dace da amfani da makaman nukiliya inda ake damuwa da kunna radiation.

Kyakkyawan Ƙirƙira– Ana iya yin amfani da Inconel 718 a zafin 900-1150°C kuma ana yin amfani da shi a sanyi ta amfani da dabarun yau da kullun. Yin amfani da sanyi yana ƙara ƙarfi sosai yayin da yake kiyaye isasshen iska. Ana iya yin amfani da ƙarfe ta amfani da kayan aikin carbide ko yumbu tare da sigogi masu dacewa.

Inconel 718 da Inconel 625: Kwatanta

Kadara	Inconel 718	Inconel 625
Ƙarfafa Tsarin	Taurarewar ruwan sama (γ″ + γ′). Yana buƙatar maganin zafi	Ƙarfafa maganin tauri (ba a buƙatar maganin zafi)
Ƙarfin Taurin Kai	≥ 1,240 MPa (180 ksi)	~690 MPa (100 ksi)
Ƙarfin Zafin Jiki	-253°C zuwa 700°C	Mai saurin kamuwa zuwa 982°C (1800°F)
Abubuwan da ke cikin ƙarfe	~15-20%	≤5%
Abubuwan da ke cikin Niobium	4.75-5.50% (mahimmanci ga γ″)	3.15-4.15%
Abubuwan da ke cikin Molybdenum	2.80-3.30%	8-10% (juriyar rami)
Mai Bambancin Maɓalli	Mafi girman ƙarfi, ƙarfin walda, juriyar gajiya	Kyakkyawan juriya ga lalata a cikin ruwan teku da acid
An fi so Ga	Faifan injinan turbine na sararin samaniya, injunan jet, injunan roka, mai da iskar gas na HPHT, maƙallan	Muhalli na ruwa, bututun ruwan teku, sarrafa sinadarai, FGD

Lokacin da za a zaɓi Inconel 718:Aikace-aikace da ke buƙatar ƙarfin zafin jiki mai yawa, juriya ga ƙwanƙwasawa, da kuma aikin gajiya har zuwa 700°C inda juriya ga tsatsa ta zama ta biyu. Na yau da kullun: sassan injinan turbine, injunan roka, mai da iskar gas na HPHT.

Lokacin da za a zaɓi Inconel 625:Aikace-aikace da ke buƙatar kyakkyawan juriya ga tsatsa a cikin ruwan teku, acid, da muhallin da ke ɗauke da sinadarin chloride mai yawa inda ƙarfin matsakaici ya karɓu. Na yau da kullun: bututun ruwa, sarrafa sinadarai, tsarin FGD.

Maganin Zafi na Inconel 718

Inconel 718 yana buƙatar takamaiman jerin maganin zafi don cimma kyawawan halaye na injiniya:

Tsarin Kula da Zafi na yau da kullun:

1. Maganin Rufewa:927-1010°C (1700-1850°F) na tsawon awa 1, sanyaya da sauri (ruwa ko mai kashewa)

Manufa: Narke dukkan abubuwan da suka haifar, cimma austenite mai matakai ɗaya

2. Tsufa Mataki na Farko:718°C (1325°F) na tsawon awanni 8, tanda ta yi sanyi zuwa 620°C

3. Tsufa Mataki na Biyu:620°C (1150°F) na tsawon awanni 8-10, jimlar lokacin tsufa awanni 18, sanyaya iska

Manufa: Yi ruwan sama γ″ da γ′ don ƙarfin da juriya ga rarrafe

Madadin Maganin Zafi (Don Inganta Hutuwar Damuwa):

Maganin Rufewa:1038-1066°C (1900-1950°F), sanyaya da sauri
Tsufa Mataki na Farko:760°C (1400°F) na tsawon awanni 10, tanda ta yi sanyi zuwa 650°C
Tsufa Mataki na Biyu:650°C (1200°F) na tsawon awanni 20, sanyaya iska

Muhimman Abubuwan Da Ake Tunani:

Matakin γ″ (Ni₃Nb) shine babban matakin ƙarfafawa kuma yana iya narkewa. Sama da 650°C, yana canzawa zuwa yanayin δ mai karko (Ni₃Nb, orthorhombic) wanda ke haifar da raguwar ƙarfi
Tsawon lokaci da aka ɗauka a zafin jiki na 600-800°C na iya haifar da δ a iyakokin hatsi, yana rage tauri.
Dole ne saurin sanyaya bayan an cire ruwan da ke cikinsa ya zama mai sauri don hana ruwan sama mai cutarwa

Samfurin da ake samu daga Womic Steel

Bututu Mara Sumul & Bututu Mara Sumul

Diamita na Waje:6mm – 350mm (1/4" – 14")
Kauri a Bango:1mm – 40mm (Jadawalin 5S zuwa XXS)
Tsawon:Har zuwa mita 12
Ma'auni:ASTM B983, AMS 5589, AMS 5590
Aikace-aikace:Bututun musayar zafi, tsarin ruwa mai matsin lamba, bututun sararin samaniya, layukan kayan aiki
Kalmomi Masu Mahimmanci:Bututun Inconel 718 mara shinge, bututun UNS N07718, bututun 2.4668 mara shinge, bututun GH4169, bututun nickel mai ƙarfi

Bututun da aka haɗa

Diamita na Waje:50mm – 1200mm (2" – 48")
Kauri a Bango:1.0mm – 30mm
Ma'auni:ASTM B904, ASTM B906
Aikace-aikace:Bututun tsari mai girma-diamita, harsashin musayar zafi, aikace-aikacen tsari
Kalmomi Masu Mahimmanci:Bututun da aka haɗa da Inconel 718, bututun ƙarfe mai ƙarfe 718 ERW, babban bututun nickel mai diamita

Sanda na Karfe (Zagaye, Murabba'i, Faɗi, Hex)

Diamita:5mm - 600mm
Fuskar sama:An yi birgima da zafi, Mai haske (an ja shi da sanyi), An niƙa, An juya, an bare
Ma'auni:ASTM B637, AMS 5662 (Maganin da aka Yi wa Maganin), AMS 5663 (Tsofaffi), AMS 5664
Aikace-aikace:Faifan injin turbine, shafts, bawul mai tushe, maƙallan, ƙusoshi, ƙusoshin, injinan injin, maɓuɓɓugan ruwa
Kalmomi Masu Mahimmanci:Sandar zagaye ta Inconel 718, sandar UNS N07718, sandar GH4169, sandar gami ta nickel, sandar superalloy mai ƙarfi

Farantin Karfe & Takarda

Kauri:0.5mm – 150mm
Faɗi:Har zuwa 2500mm
Ma'auni:ASTM B670, AMS 5596, AMS 5597
Aikace-aikace:Harsashin matsi na tasoshin jini, abubuwan da aka gyara, guraben flange, abubuwan da aka gyara na injin roka
Kalmomi Masu Mahimmanci:Farantin Inconel 718, takardar ƙarfe 718, farantin GH4169, takardar ƙarfe mai zafi

Karfe nada & tsiri

Kauri:0.5mm – 6.0mm
Faɗi:10mm - 1500mm
Ma'auni:ASTM B670, AMS 5596
Aikace-aikace:An samar da kayan haɗin gwiwa, bellows, haɗin gwiwa na faɗaɗawa, stampings, bututu mai bango mai sirara
Kalmomi Masu Mahimmanci:Na'urar Inconel 718, tsiri mai ƙarfe na nickel, na'urar GH4169

Kayan Aiki na Flanges & Bututu

Nau'i:Wuyar Walda, Zamewa, Makaho, Walda ta Socket, Zare, Haɗin Cinya
Girman:1/2" – 48" (DN15 – DN1200)
Matsayin Matsi:Aji na 150 - Aji na 2500
Ma'auni:ASTM B637, ASME B16.5, ASME B16.47
Kalmomi Masu Mahimmanci:Flanges na Inconel 718, flanges na wuyan walda na ƙarfe 718, kayan haɗin N07718

Ƙirƙira

Nau'i:Zobba, faifan diski, shafts, jikin bawul, abubuwan injin turbine, siffofi na musamman
Nauyi:Har zuwa 5,000kg a kowane yanki
Ma'auni:ASTM B637, AMS 5662, AMS 5663, AMS 5664
Aikace-aikace:Faifan injin turbine, faifan compressor, casings na injin, abubuwan da ke cikin injin roka
Kalmomi Masu Mahimmanci:Inconel 718 forging, GH4169 forged zobe, turbine disk forging

Bawuloli na Inconel 718

Nau'i:Bawuloli na ƙwallo, bawuloli na ƙofa, bawuloli na duniya, bawuloli na duba
Girman:1/2" – 24" (DN15 – DN600)
Matsayin Matsi:Aji na 150 - Aji na 2500
Yanayin Zafin Jiki:-253°C zuwa +700°C
Ka'idojin Zane:API 608, API 6D, ASME B16.34
Wurin zama:Mai tauri, RPTFE, PEEK
Aiki:Manual, Pneumatic, Electric
Aikace-aikace:Man fetur da iskar gas na HPHT, keɓewar yanayin zafi mai yawa, tsarin sarrafa injin turbine, sabis na nukiliya
Kalmomi Masu Mahimmanci:Bawul ɗin ƙwallon Inconel 718, bawul ɗin ƙofar ƙarfe 718, bawul ɗin nickel mai zafi mai zafi

Waya & Maƙallan

Diamita na Waya:0.5mm – 12mm
Maƙallan:Bolts, goro, studs, sukurori, washers, maɓuɓɓugan ruwa
Ma'auni:ASTM B637, AMS 5662, AMS 5663, AMS 5832
Kalmomi Masu Mahimmanci:Wayar Inconel 718, maƙallan GH4169, ƙusoshin ƙarfe na nickel, maɓuɓɓugan zafi mai yawa

Aikace-aikacen Inconel 718

sararin samaniya– Inconel 718 ita ce ma'aunin masana'antu na abubuwan da ke cikin injin jet, ciki har da faifan compressor mai matsin lamba, faifan turbine, shafts na turbine, ruwan wukake na compressor, ɗakunan konewa, abubuwan da ke cikin bayan wuta, da kuma casings na injin. Haka kuma ana amfani da ƙarfe don abubuwan da ke cikin injin roka, ɗakunan turawa, famfunan turbo, da kuma tsarin sararin samaniya. Ita ce superalloy da aka fi amfani da ita a aikace-aikacen sararin samaniya.

Samar da Makamashi da Wutar Lantarki– Ana amfani da wannan ƙarfe sosai a cikin sassan injinan iskar gas, ciki har da faifan injinan turbine, ruwan wukake, hanyoyin canja wuri, da maƙallan injinan iskar gas na ƙasa da na ruwa. Juriyarsa ta jure wa iska a zafin 650-700°C ta sa ya dace da aiki na dogon lokaci a cikin kayan aikin samar da wutar lantarki.

Masana'antar Nukiliya– Ana amfani da Inconel 718 a cikin tasoshin matsin lamba na reactor, bututun janareta na tururi, hanyoyin sarrafa sandar sarrafawa, da kuma cikin ciki. Ƙarancin sinadarin cobalt (≤1.0%) yana rage kunna rediyoaktif, wanda hakan ya sa ya dace da amfani da makaman nukiliya.

Mai da Iskar Gas– An ƙayyade wannan ƙarfe don kayan aikin rijiyar mai zafi mai ƙarfi (HPHT), abubuwan da ke cikin bututun da ke ƙasa, rataye bututu, bawuloli, famfo, da kayan aikin ƙarƙashin teku a cikin yanayin aiki mai tsami. Inconel 718 yana tsayayya da fashewar damuwa ta sulfide da fashewar hydrogen da ke haifar da shi a cikin muhallin da ke ɗauke da H₂S.

Maƙallan Zafi Mai Tsayi– Inconel 718 kayan aiki ne na yau da kullun don mannewa masu zafi mai yawa, gami da ƙusoshin turbine, studs, goro, da sukurori waɗanda ke aiki a yanayin zafi har zuwa 700°C. Juriyarsa ga sassauta damuwa tana tabbatar da dorewar haɗin gwiwa na dogon lokaci.

Aikace-aikacen Cryogenic– Gilashin yana riƙe da tauri na musamman a yanayin zafi mai zafi har zuwa -253°C, wanda hakan ya sa ya dace da tankunan ajiyar hydrogen da ruwa da kuma tsarin oxygen.

Ma'auni & Bayani dalla-dalla

Fom ɗin Samfuri	ASTM Standard	Ma'aunin ASME	Tsarin AMS
Bututu/Bututu Mara Sumul	ASTM B983	—	AMS 5589, AMS 5590
Sandar/Sanda	ASTM B637	ASME SB-637	AMS 5662, AMS 5663, AMS 5664
Faranti/Takarda/Teri	ASTM B670	—	AMS 5596, AMS 5597
Ƙirƙira	ASTM B637	ASME SB-637	AMS 5662, AMS 5663, AMS 5664
Waya	ASTM B637	—	AMS 5832, AMS 5962
Naɗin UNS	N07718
Lambar Aiki	2.4668
Naɗin DIN	NiCr19Fe19NbMo
Daidaiton Sinanci	GH4169 / GH169

Tambayoyin da Ake Yawan Yi

T: Menene bambanci tsakanin Inconel 718 da Inconel 625?

A: Inconel 718 ya yi fice a ƙarfin zafin jiki mai yawa (har zuwa 700°C) ta hanyar taurarewar hazo (matakai γ″ da γ′), yayin da Inconel 625 ya yi fice a juriyar tsatsa (ruwan teku, acid) ta hanyar ƙarfafa maganin ƙarfi. Zaɓi 718 don aikace-aikacen ƙarfi mai mahimmanci; zaɓi 625 don muhallin da ke da mahimmanci ga tsatsa. Yawan 718 shine 8.19 g/cm³, yawan 625 shine 8.44 g/cm³.

T: Menene matsakaicin zafin sabis na Inconel 718?

A: An ƙididdige Inconel 718 don yin aiki na dogon lokaci har zuwa 700°C (1300°F). Tafiye-tafiye na ɗan gajeren lokaci har zuwa 980°C (1800°F) yana yiwuwa don juriya ga iskar shaka, amma ƙarfi yana raguwa sosai sama da 700°C.

T: Shin Inconel 718 yana da sauƙin walda?

A: Eh. Ana ɗaukar Inconel 718 a matsayin mafi kyawun ƙarfe mai ƙarfi da aka yi da nickel. Yana nuna kyakkyawan juriya ga fashewar ƙarfe mai ƙarfi kuma ana iya haɗa shi a cikin yanayi mai ƙarfi da tsufa ta amfani da hanyoyin walda na TIG, MIG, hasken lantarki, da laser. Ana ɗaukarsa ya dace da walda ba tare da matsalolin fashewar ƙarfe ba bayan walda.

T: Menene daidaikun Inconel 718 na kasar Sin?

A: Daidaiton Sinanci shine GH4169 da GH169 (GB/T 14992). Waɗannan ma'aunin sun yi daidai da ƙa'idodin ƙasar Sin na ƙarfe masu zafi.

T: Waɗanne nau'ikan samfura ne ake samu don Inconel 718?

A: Womic Steel tana samar da Inconel 718 a cikin bututu mara shinge, bututun da aka haɗa da welded, sandar ƙarfe, farantin ƙarfe, na'urar ƙarfe, tsiri, flanges, kayan haɗi, kayan ƙira, waya, maɓuɓɓugan ruwa, mannewa, da bawuloli. Cikakken bayanin samfurin da kewayon girmansa an jera su a cikin sashin wadatar samfurin.

T: Shin Inconel 718 yana buƙatar maganin zafi?

A: Eh. Inconel 718 ya sami ƙarfinsa na musamman ta hanyar taurare ruwan sama da kuma maganin zafi. Tsarin da aka saba amfani da shi shine a rage ruwan zafi (927-1010°C) sannan a sake tsufa sau biyu (718°C na tsawon awanni 8, a sanyaya tanda zuwa 620°C, a riƙe awanni 8-10).

T: Shin Inconel 718 yana maganadisu?

A: A'a. Inconel 718 ba shi da maganadisu a kowane yanayi, wanda hakan ya sa ya dace da amfani inda dole ne a guji tsangwama ta maganadisu.

T: Menene ƙarfin gajiyar Inconel 718?

A: Inconel 718 yana nuna juriyar gajiya a yanayin zafi mai yawa. Iyakar gajiya mai yawan zagayowar (HCF) a 650°C ta wuce 400 MPa, wanda hakan ya sa ya dace da aikace-aikace waɗanda ke ƙarƙashin lodin cyclic da gajiyar zafi.

Tuntuɓi Womic Steel

Yanar Gizo: www.womicsteel.com

Imel: sales@womicsteel.com

Waya / WhatsApp / WeChat:

Victor: +86 15575100681

Jack: +86 18390957568

Womic Steel – Abokin hulɗarka mai aminci ga Inconel 718 (UNS N07718, GH4169) bututu mara shinge, bututun da aka haɗa da walda, sandar ƙarfe, farantin ƙarfe, na'urar ƙarfe, flanges, kayan aiki, kayan ƙira, bawuloli, maƙallan haɗi, da maɓuɓɓugan ruwa don aikace-aikacen mai da iskar gas, injin turbine na iskar gas, nukiliya, da HPHT a duk duniya. Cikakken bin diddigin bayanai, takardar shaidar ƙungiyar rarrabuwa (CCS, ABS, BV, DNV, LR), da takaddun EN 10204 Type 3.1/3.2 suna nan.